Junk Catcher

Purpose

To catch and trap debris that is suspended in wellbore.

Description

BT Junk Catchers are made up of 6 components:

1. Fishneck
2. Barrel
3. Flapper Seat
4. Flapper
5. Connector Sub
6. Gauge Ring

Operation

Assemble the Junk Catcher with the desired size of gauge ring and hoist into the lubricator. Lower into wellbore making note of any fluid level, once in fluid the speed of descent should be rapid enough to hold the flapper in the open position, thus allowing debris to pass through and become trapped in the
slotted barrel. Once desired depth has been achieved, remove Junk Catcher from wellbore and inspect contents.

Precautions

Ensure the proper gauge ring is installed, large diameter material may not be able to pass through opening in Junk catcher, if this is suspected, other avenues may have to be considered.