This product is no longer in stock
Setting in tubing strings without upsets, typically integral joint where couplings do not exist. Setting in tubing strings where there is a need for a more secure and / or positive barrier than a conventional Slip type stop.
Consists of eight parts:
3. Retainer Band
4. Slip Carrier
8. Set Screw
Set in wellbore to provide a platform for numerous wireline operations, plungerlift, or as a safeguard to prevent debris from falling down the wellbore.
The Ratchet slip type tubing stops are latched into a jar down to shear pulling tool and / or a slip stop running tool and attached to the tool string.
The stop is lowered down the tubing slowly until desired depth has been reached, the tool string is accelerated downward rapidly. The velocity forces the slip up the tapered slip mandrel (body), setting them against the tubing wall. At
the same instance the ratchets in the slip carrier move over the serrated teeth on the body and lock in place at the point where the slips are fully engages in the tubing wall.
Jar down to ensure the slips and ratchets are securely set, this will also shear the jar down pulling tool setting the stop.
Pulling the slip type tubing stop is done by attaching a pulling tool to the tool string and lowering it to stop depth and latching the stop. Once the stop is
latched, jarring upward will unseat the stop, and shear the ratchets for removal from the wellbore.
Slip type tubing stops require velocity for setting, making precise setting depths
difficult to achieve.