No products
Top sellers
Knife
$0.00
Lug Segment
$0.00
Split Ring
$0.00
Spring
$0.00
Sleeve
$0.00
Mechanical Perforator
$0.00
Female Union Half
$0.00
Hand Nut
$0.00
Male Union Half
$0.00
Packoff Equipment
- Slickline Tools
- Shifting Tools
- Fishing Tools
- Bailers
- Probes and Shanks
- Lock Mandrels
- Equalizing Assemblies
- Tool String
- Accelerator
- Blind Box
- Centralizer
- Crossover
- Diamond Broach
- Gauge Ring Solid
- Hydraulic Tubing Punch
- Indexing Tool
- Knuckle Jar
- Knuckle Joint
- Mechanical Jar
- Mechanical Perforator
- Quick Connect
- Roller Stem
- Sample Bailer
- Sand Swab Mandrel
- Slip Type Rope Socket
- Stem
- Swab Mandrel
- Swaging Tool
- Thimble Rope Socket
- Tubing Broach
- Tubing Brush
- Tubing End Locator
- Tubular Jar
- Wax Knife
- Wedge Rope Socket
- Running Tools
- A Stop Running Tool
- B Stop Running Tool
- C-1 Running Tool
- C-2 Running Tool
- D Running Tool
- F Stop Running Tool
- GA 2 Running Tool
- J Running Tool
- JC 3 Running Tool
- JC 3 Running Tool (Extended)
- JK Running Tool
- P Running Tool
- R Check Set
- R Running Tool
- RK Running Tool
- Safety Firing Head
- W Running Tool
- X Check Set
- X-Line Running Tool
- Pulling Tools
- Packoff Equipment
- Testing Equipment
- BHP Equipment
- Sheaves & Accessories
- Logging Tools
- Pressure Control
- Spare Parts
- Wireline Pressure Control Equipment
- Sheaves and Accessories
- Instrumentation - Wireline
- Measuring Wheels
- Model MHD Measuring Head
- Model 565-D Digital Weight Indicator
- Digital Dial with Posi-Drive Pointer
- Data Logger Software
- Model FHC "M" Load Cell
- Model FHC "G" Load Cell
- Model C06-Series Load Cell | Pancake Style
- Model FHC 15K Load Cell | Pacman Style
- Model FHC LTX 150K Load Cell
- Model FHC C05 Series Load Cell
- OCSD Portable Dynamometer
- Pumps
- Tubular
- Wireline Pressure Control
Purpose
Setting in tubing strings without upsets, typically integral joint where couplingsdo not exist.Used primarily for straddle pack offs, or tubing pack offs.
Description
Consists of 3 parts:
1. Fishneck
2. Slips
3. Retainer Wire
Internal fishing neck, when setting, the tapered slip carrier forces the slips tight to the inner tubingwall.
Ran with a shear down pulling tool, G Running Tool, or a GS. Pulled with aGS or GR pulling tool.
Operation
Attach to desired running tool and lower into wellbore to desired depth. Setslips by jarring tapered fishneck down and forcing slips against inner tubingwall, shear off and remove toolstring wellbore.
To retrieve the G Anchor, attach the GS / GR to toolstring and lower intowellbore, latch and jar up to release the slip from the taper, remove fromwellbore.
