D2 Shifting Tool

New
D2 Shifting Tool

New product

$0.00

Description

The D-2 shifting tool is designed to shift Baker style L sliding sleeves.

Made up of several components, the main parts of the D-2 shifting tool are:

1. Fishneck
2. Mandrel
3. Collet
4. Connecting Adjuster
5. Control Sleeve
6. Nut
7. Spring
8. Retractor
9. Retaining Sleeve
10. Dog
11. Dog Retainer
12. Dog Spring
13. Key
14. Thread Protector

Collets come in different OD measurements, each sleeve ID will require a corresponding collet with a larger OD.

The purpose of the collet is to locate the sleeve desired to be shifted, the tool can then be extended allowing the spring loaded dogs to move outward latching the inner sleeve for shifting. The collet design allows locating and shifting any desired sleeve in a completion with two or more sleeves.

The selective collet feature includes both the opening and closing L sleeves.

The tool requires a specific distance from the square face of the shifting dog to the collet locating profile. This measurement is done with the tool in the retracted position and allows for the shifting tool to disengage the sleeve when the shifting sequence is complete. Although the shifting tool can be deliberately released three steel shear pins are incorporated at the base of the shifting dogs allowing for a safety release feature.

Top